Description
Woven polypropylene flat tapes for separation and directional tensile reinforcement. BRELVO can coordinate available constructions against drawings and project requirements; a final grade must be confirmed for each enquiry.
Applications
- Road and rail subgrade reinforcement
- Embankment separation and stabilization
- Hydraulic and erosion-control works where specified
Indicative parameters
Ranges below are examples from supplied supplier literature, not guaranteed values or an approved project specification. See the Additional information tab for the parameter list.
- Polymer: PP
- Construction: Flat-tape woven
- Indicative mass per unit area: 120-520 g/m2 (supplier sample range)
- Indicative roll width: 1-6 m (supplier sample range)
Engineering review
- Warp and weft strength and elongation
- Opening size and water flow
- Puncture and tear resistance
- Seams, overlaps and construction loads
Technical reference and reports
Download the BRELVO Geosynthetics Technical Selection Guide (PDF). This is a preliminary selection brief, not an independent test report or certification. Ask for the current grade-specific datasheet and batch/project test records before specifying or ordering.
Send your project requirements and request the current technical documents.
Illustrative product image. Technical source used for this overview: Geotextile2.pdf, PP flat-wire woven section; no PET woven grade assumed.
